•
Plumbing requirements.
Prepare a suitable drain and a mains that supply water a maximum hardness
of 3/5 French degrees (60/85 ppm).
SYMBOLS
A
B
D
E
RESIDUAL RISKS
Although the manufacturer has provided mechanical and electrical safety sys-
tems, dangerous areas persist during the use of the machine:
MACHINE RECEIVING
TRANSPORT
The power wires must be sized according to the
maximum current required by the machine to en-
sure a total voltage loss under full load of less than
2%.
A
General hazard
B
Electrical shock hazard
C
Burns hazard
C
D
Hazard of damage to the machine
E
Operation reserved for the qualified technician,
in compliance with current standards
•
Coffee dispensing groups.
•
Steam wand.
•
Hot water wand.
•
Cup warmer.
The machine is transported on pallets containing
several machines inside cartons strapped to the
pallet.
Operators performing any shipping or handling op-
erations must wear gloves, safety shoes and over-
alls with elasticized cuffs.
+
The machine must be moved by 2 or more opera-
tors.
APPIA LIFE
15