Slave Mode; Dmx Modes - afx light SPOT 60 LED Manuel D'utilisation

SLAVE MODE
Up‐to 32 units can be daisy chained together with one single unit acting as Master and all other linked units acting as
Slaves. Slave units will all run in sync with the master unit without the need for an additional controller. Connections
can be made using standard DMX control cables with Master unit running in Auto Run or Sound Activated Modes
and placed at the beginning of the chain
Selection of Slave Mode
Press the "MENU" button and choose "RUN". When the "ENTER" button is pressed, the LED display changes to
"SLAVE" and the unit will be slaved to control signals coming from a Master unit
DMX MODES
Setting DMX Addresses
Use the "MENU" button to display "GENERAL". Press ENTER and use Up and Down buttons to select " ADDRESS"
then press ENTER. Use "UP" and "DOWN" buttons allows individual DMX addresses to be set from "d001" to "d512"
DMX TABLE
CHANNELS FUNCTION
1
2 Pan 16Bit
3
4 Tilt 16Bit
5 Pan & Tilt speed
6 Dimmer
7 Strobe
8 Color wheel
9 Focus
Rotating gobo
10
wheel
11 Gobo rotating
12 Static gobo wheel
13 Triple prism
14 Reset
©Copyright LOTRONIC 2013
DMX
Pan 000-255
000-255
Tilt 000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
Functions
0-540
Pan fine
0-270
Tilt fine
Slow-fast
From dark to bright
From slow to fast
0-29 red
30-49 green
50-69 blue
70-89 yellow
90-109 purple
110-129 simple green
130-149 simple blue
150-255 rainbow
From close to far
Gobo rotating from slow to fast and clockwise and un-
clockwise to turn
Gobo rotating from slow to fast
The gobo wheel clockwise and un-clockwise to turn from
slow and fast
0-9,OFF
10-63 ON
64-159 clockwise from slow to fast
160-255 from fast to slow
reset（200 stop 3second reset）
SPOT60LED Page 7