afx light SPOT 60 LED Manuel D'utilisation page 5

OPERATING INSTRUCTIONS
Navigation through the Control Panel
Access control panel functions using the four panel buttons located directly underneath the LCD Display.
Button Function
<MENU> Used to access the menu or to return to a previous menu option
<UP> Scrolls through menu options in ascending order
<DOWN> Scrolls through menu options in descending order
<ENTER> Used to select and store the current menu or option within a menu
When a menu function is selected, the display will show immediately the first available option for the selected menu
function. To select a menu item, press <ENTER>.
MENU MAP
You have 4 Main menu : RUN, EDIT, SPECIAL and GENERAL. Use up and down buttons to select one of these menus
and press enter button to enter in the menu.
‐ RUN ( Selection of operating mode ). Use up and down buttons to select and Enter to confirm
o DMX512 ( DMX mode )
o TEST ( to check if the LED is OK )
o SLAVE ( To set the moving head in slave mode )
o CUSTOM
o SOUND ( The sound mode )
o AUTO 1 ( The first automatic mode )
o AUTO 2 ( The second automatic mode )
‐ EDIT ( you can edit a program or change order of DMX channels )
o PROGRAM ( To edit the automatic program ) Use up and down buttons to select and Enter to confirm
Set STEP number then press Enter button
o CHANNELS ( To change the order of the DMX channels )
Select the DMX channel number you want to change then press ENTER
After select the DMX channel number you want to replace then press ENTER
©Copyright LOTRONIC 2013
• For each step, you can adjust the value of : PAN, PAN FINE, TILT, TILT FINE, SPEED,
DIMMER, STROBE, COLOR, FOCUS, GOBO 1, ROT, GOBO 2 and PRISM. You must to
adjust also the time of the step ( TIME )
• Then if you want to add this step to the program, set the USE parameter to Yes
Note : Please don't change the DMX channel order.
SPOT60LED Page 5