GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Appliance description (pic. 1)
1.
Switch lever
2.
Safety button
3.
Electric connection
4.
Upper connecting post
5.
Bottom connecting post
6.
Engine housing
7.
Wheels
8.
Collection container
9.
Working height adjusting wheel
Supply includes
1
verticutter
1
bottom connecting post (consisting of 2 parts)
1
upper connecting post
1
set of screws and accessories (cable clamps,
hand wheels, cable pull relief)
1
Operating Instructions and certificate of warranty
1
collection container
1
collection container frame
Warranty
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on the
day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with
indication of date of sale must be presented in case of
claiming for the warranty rights.
Warranty does not cover unprofessional use such as device
overload, violent use, damage caused by third party or
foreign materials, failure to comply with operations and
assembly manual, and normal wear and tear.
Technical specifications
Connection
230V~50Hz
Engine power
1700 W
Engine speed
2800 per min
Working width
362 mm
Working height
-8/-5/-1/3/8/12 (in mm)
Container capacity
50 l
Noise:
L
WA
Weight:
18 kg
Dimensions
1100 x 600 x 980 (LxWxH in mm)
General safety instructions
The Operating Instructions must be read
thoroughly
before using the appliance. If there are any doubts
regarding the appliance connection and operation,
please
contact the manufacturer (customer service centre).
TO ENSURE HIGH SAFETY LEVEL, PLEASE FOLLOW
CAREFULLY THE INSTRUCTIONS BELOW:
Caution: To be used with RCD 30 mA (safety
switch against stray current) only!
Illustrative pictures! Translation of original operating instructions.
-1
89 dB
CAUTION!
Keep the place of your work clean and tidy. Mess in the
place of work and on the work table increases the risk of
accidents and injuries.
Make sure the conditions you are working in are
appropriate. Do not use the electric tools and devices in a
moist and wet environment. Provide appropriate lighting.
Do not expose the electric tools to rain or high air humidity
levels. Do not switch the electric tools on near flammable
liquids or gases.
Do not let foreign persons get near the appliance.
Keep all visitors and bystanders, especially children and ill
or weak persons, in a safe distance from the place of your
work.
Ensure that tools are stored in a safe way. Put the
appliances you no longer use to a dry place, an elevated
position if possible, or lock them in order not to be
accessed by other persons.
Correct appliance should always be used for the
appropriate type of work. Do not use e.g. small
appliances or accessories for works that actually need to
be provided using bigger appliances. Use the appliances
exclusively for the designated purposes. Do not overload
the appliance!
Keep an eye out for the feeder cable. Do not pull the
cable. Do not use it for unplugging the appliance. Keep the
cable out of reach of heat sources, oil and sharp edges.
Avoid unintentional switching-on. Before plugging,
make always sure the appliance is switched off using the
switch button.
Special extension cables to be used outdoors only.
For outdoor use, special extension cables appropriate for
this purpose and adequately identified are needed.
Be concentrated at all times. Pay attention to what you
are doing. Use common sense when working. Do not use
the electric tools if you are tired.
Keep an eye out for damaged parts. Check the
appliance before using it. Are any parts damaged? If there
is any slight damage, consider seriously whether the
appliance is going to work safely and with no faults.
Prevent electric shock. Prevent body contact with
grounded items, e.g. water piping, heating elements,
cookers and fridges.
Approved parts to be used only. Identical spare parts to
be used only for servicing and repairs. For that purpose,
contact the authorised customer service centre.
Warning! Any use of accessories and extensions not
explicitly recommended in these Operating Instructions
can put persons and items at risk.
Make sure your body posture is stable
Avoid any abnormal body posture. Ensure safe posture
and keep balance at all times.
Do not leave adjusting keys in the appliance
Make sure you have removed all the adjusting keys and
tools from the appliance before putting it into operation.
Appliance-specific safety instructions
Wearing personal protective equipment is absolutely
necessary for all works with the appliance.
To prevent eye injury, protective glasses should always be
worn.
Check whether the guards are fitted properly before you
start working.
Do not overload the appliance. Working in the specified
power range is better and safer.
10