Specifications; Amplifier Section - Sony game sync LBT-XG900AV Mode D'emploi

Troubleshooting (continued)
There is excessive wow or flutter, or the sound
drops out.
• The capstans or pinch rollers are dirty (see
"Cleaning the tape heads" on page 30).
Noise increases or the high frequencies are erased.
• The record/playback heads are magnetized (see
"Demagnetizing the tape heads" on page 30).
Tuner
Severe hum or noise ("TUNED" or "STEREO"
flashes in the display).
• Adjust the antenna.
• The signal strength is too weak. Connect the
external antenna.
A stereo FM program cannot be received in stereo.
• Press STEREO/MONO so that "STEREO"
disappears.
If other troubles not described above
occur, reset the system as follows:
1
Press c/CLOCK SET, ENTER/NEXT and
?/1 at the same time.
2
Unplug the power cord.
3
Plug the power cord back in.
4
Press ?/1 to turn on the power.
The unit is reset to factory settings. All the
settings you made are cleared.
GB
32

Specifications

Amplifier section

LBT-XG900AV
Front Speaker:
DIN power output (Rated)
Continuous RMS power output (Reference)
Music power output (Reference)
Center Speaker:
DIN power output (Rated)
Continuous RMS power output (Reference)
Music power output (Reference)
Rear Speaker:
DIN power output (Rated)
Continuous RMS power output (Reference)
Music power output (Reference)
LBT-XG100AV
Front Speaker:
The following measured at AC 120/220/240 V,
50 Hz
DIN power output (Rated)
Continuous RMS power output (Reference)
Center Speaker:
DIN power output (Rated)
Continuous RMS power output (Reference)
90 + 90 watts
(6 ohms at 1 kHz, DIN)
120 + 120 watts
(6 ohms at 1 kHz, 10%
THD)
200 + 200 watts
(6 ohms at 1 kHz, 10%
THD)
30 watts
(8 ohms at 1 kHz, DIN)
40 watts
(8 ohms at 1 kHz, 10%
THD)
60 watts
(8 ohms at 1 kHz, 10%
THD)
30 + 30 watts
(8 ohms at 1 kHz, DIN)
40 + 40 watts
(8 ohms at 1 kHz, 10%
THD)
60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
150 + 150 watts
(6 ohms at 1 kHz, DIN)
200 + 200 watts
(6 ohms at 1 kHz, 10%
THD)
35 watts
(8 ohms at 1 kHz, DIN)
50 watts
(8 ohms at 1 kHz, 10%
THD)