Sony game sync LBT-XG900AV Mode D'emploi page 7

1 Connect the speakers.
1 Connecting the front speakers
Connect the speaker cords to the FRONT
SPEAKER jacks as below.
Insert only the stripped portion.
2 Connecting the center speaker
Connect the speaker cords to the
SURROUND SPEAKER CENTER jack as
below.
Black/Stripe (#) Red/Solid (3)
3 Connecting the rear speakers
Connect the speaker cords to the
SURROUND SPEAKER REAR jacks as
below.
Black/Stripe (#) Red/Solid (3)
Note
Keep the speaker cords away from the antennas to
prevent noise.
Red/Solid (3)
Black/Stripe (#)
2 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
Jack type A
Extend the FM lead
antenna horizontally.
AM loop antenna
Jack type B
Extend the FM lead
antenna horizontally.
AM loop antenna
3 For models with a voltage selector, set
VOLTAGE SELECTOR to the position of
your local power line voltage.
VOLTAGE SELECTOR
120V
220V
230 ~ 240V
4 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
adaptor).
C O
A X I
A L
F M
7 5
continued
GB
7