Switch Lighting On / Off - Truma CP Mode D'emploi Et Instructions De Montage

Selecting the energy type (HEATER only)
For more information refer to "Select energy type" on
page 27
– Select the desired energy type with the rotary push button.
– Tap the rotary push button to confirm the selection.
Fig. 16
Select fan level
– Select desired fan level with rotary push button.
– Tap the rotary push button to confirm the value.
Fig. 17
Activate time switch (ON)
– Activate time switch with rotary push button (ON).
– Tap the rotary push button to confirm the value.
Fig. 18
30
Deactivating the time switch (OFF)
– Change to the setting level by tapping the rotary push
button.
– Deactivate time switch with rotary push button (OFF).
– Tap the rotary push button to confirm the value.
Fig. 19
Only with Truma Aventa roof-mounted air conditioning sys-
tems with Aventa air distributor (with integrated lighting).
– Select icon in menu bar (4) with rotary push button.
– Change to the setting level by tapping on the rotary push
button.
– Select required function with rotary push button.
2
1 – 5 – Switch lighting on.
OFF
– Tap the rotary push button to confirm the value.
– The time switch remains active until it is deactivated
(OFF), even for several days.
– If the time switch is programmed and active, the time
switch icon flashes.

Switch lighting on / off

Brightness selectable in 5 levels.
– Switch lighting off.