Accessories; Lithium - Polymer Storage Battery - Titan TA 250 Notice D'instructions

9.

Accessories

9.1. Lithium – Polymer storage battery
The Li-Po storage battery is supplied partly charged;
it can be charged at any time without risking a
shorter battery life. Interrupting charging does not
shorten its life either.
The operating temperature of the Li-Po storage
battery is between 0 °C and +45 °C; if the Li-Po
storage battery is stored at a lower temperature, it
may occur that the tool indicates an empty state of
charge. In that case refresh the charge and put the
Li-Po storage battery in the charger for 2 minutes.
The refreshment cycle is performed within those two
minutes.
Charging the lithium – polymer storage battery is only possible when the original
TITAN charger is used.
TA 250 / TA 450
(0001) 54 / 112
H TA 250 / 450 EU 38/15