General - Titan TA 250 Notice D'instructions

2.

General

Many thanks for your confidence in the technology of
These operating instructions are meant to facilitate the familiarization with the unit TA 250 / TA 450
and the intended use. The operating instructions contain important instructions on how the
unit can be operated safely, as intended and economically. Following the instructions helps
avoid risks, reduce repair works and downtimes and increases the reliability and life of the unit.
These operating instructions must be available at the place where the unit is operated. They must
be read and applied by all persons working with the unit. Such works especially include operation,
troubleshooting and maintenance.
Apart from the operating instructions and the regulations for the prevention of accidents being
applicable in the country where the unit is operated and on site the recognized technical rules for
safety-related and competent works have to be observed.
Adjustment and maintenance works may only be performed by trained technical staff!
Explanatory notes on the warning and instruction symbols:
Caution!
Is used in case of risks for life and health.
Attention!
Is used in case of risks which might cause damage to objects.
Note!
Is used for general instructions and for remarks whose disregard may cause faults in
operations.
The manufacturer reserves the right to make changes to the scope of delivery at any time
Copyright © TITAN Umreifungstechnik GmbH & Co.KG 2015 all rights reserved.
The contents of this document must not be duplicated, handed to third parties, published or saved in any form, neither
fully nor partly, without prior written permission by TITAN Umreifungstechnik GmbH & Co.KG.
TA 250 / TA 450
(0001)
TITAN Umreifungstechnik GmbH & Co. KG
for the purpose of improving the product.
is a registered trademark of TITAN Umreifungstechnik GmbH & Co.KG.
H TA 250 / 450 EU 09/15
36 / 112