Safety Instructions; Proper Use - ALFRA ROTABEST RB 50 SP Mode D'emploi

Dear customer,
Thank you for purchasing an ALFRA product. Read these operation instructions closely before using your device
for the first time and keep them for later reference.

Safety Instructions

During work with this machine, improper handling and/or poor maintenance result in significant hazards which can
lead to destruction of the machine and serious accidents with considerable injuries. Observe all safety instructions
of this operation manual and contact the manufacturer if you have any questions.
Always...
•
activate the switchable permanent magnet completely
•
activate the magnet on metallic, ferromagnetic materials
•
use the whole magnetic surface for working
•
work on plane surfaces
•
clean the magnetic surface and keep it clear of dirt, swarf and welding sputter
•
set the core drilling machine down gently to prevent damage to the magnetic surface
•
secure yourself with a safety belt when drilling on walls or ceilings
•
check connection cables for damage
•
make sure the mains voltage matches the machine
•
follow the instructions in the operation manual
•
familiarise new users with the safe use of the machine
•
wear safety goggles and ear protection during work
•
use safety guard if supplied
•
observe local, country-specific guidelines
•
use and store in a dry place
Never...
•
work on round or curved objects
•
drill several work pieces on top of one another
•
modify the core drilling machine or remove signs
•
use the core drilling machine when damaged or when parts are missing
•
strain or damage the underside of the magnet through heavy impact or blows
•
use the core drilling machine without having been properly instructed
•
operate the machine without having read and understood the complete operation manual
•
use the core drilling machine to support, lift or transport persons or loads
•
carry out electric welding work on the work piece at the same time as using the core drilling
machine
•
store or operate the core drilling machine at temperatures above 50°C (122°F)
•
leave the machine hanging unsupervised
•
allow the machine to come into contact with corrosive materials
People with cardiac pacemakers or other medical appliances may only use this machine
following approval by their physician.
Never touch rotating parts! Keep hands and fingers away from the work area while the motor
is running! Failure to do so can result in severe injuries!

Proper Use

This magnetic core drilling machine with switchable magnetic clamp is intended for drilling with core or solid drills
on ferromagnetic work pieces. It may only be used in a dry environment which is protected from the weather. The
machine may be used horizontally, vertically or overhead.
12