Using The Direct Steam Nozzle - shark S3973 Série Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the Direct Steam Nozzle

For a full list of what is included with your Steam Mop, please refer to box's top panel.
PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:
CAUTION: Do not press the steam trigger until the Direct Steam Nozzle is snapped into the main
nozzle of your Handheld Steamer.
CAUTION: Do not press the steam trigger while removing the Direct Steam Nozzle. Avoid touching
the tip of the Direct Steam Nozzle, as this will be very hot after steaming.
NOTE: To remove the Direct Steam Nozzle, press and hold down the Handheld Release Buttons. Then slide
out the Direct Steam Nozzle using the grip.
NOTE: The Handheld Steamer may continue to emit steam for a few seconds after the trigger is released. This
is normal, and the steaming will eventually come to a stop.
fig. 13
How to Attach/Detach:
• The Direct Steam Nozzle slides directly on to the handheld steamer. (fig. 13)
• To remove, wait 2 to 3 minutes for the tool to cool, hold the release button and pull the tool away from the unit.
Usage:
• The Direct Steam Nozzle creates direct steam spray to clean hard-to-reach nooks and crannies, flat surfaces, toys
and other places where germs may build up. (fig. 14)
• Spray direct steam and wipe clean with a wet cloth or paper towel.
Cleaning Tips:
• For effective cleaning, hold the steam output nozzle 1 to 2 inches away from the surface you're cleaning.
11
1-800-798-7398
fig. 14

Publicité

Table des Matières
loading

Table des Matières