Using The Shark Ion™ Robot; Setting The Day And Time - shark ION RV700N Serie Guide D'utilisation

USING THE SHARK ION™ ROBOT
USING THE SHARK ION ROBOT REMOTE
The remote control requires 2 AAA batteries. Install batteries into remote before using.
With the remote control, you can start and stop Shark ION Robot, select Max Cleaning
mode, send the unit back to the charging dock, and program a cleaning schedule for
your robot.
Dock Max
Clean
Enter
Hold / to Set
1
2 3
4
5 6
A B
Dock Max
Clean
C D
Enter
E F
Hold / to Set

SETTING THE DAY AND TIME

Dock Max
Clean
Enter
Hold / to Set
s h a r kc l e a n . c o m
1 Signal Icon
2 Time Icon
3 Schedule Icon
4 Days Of The Week (Mon–Sun)
5 Scheduling (On/Off)
6 Time
A Dock Button
B Max Mode Button
C Navigation Arrows
D Clean/Enter Button
E Time Button
F Schedule Button
1 Press and hold the TIME button (with the clock
icon) on the remote for one second. On the screen,
the day of the week display will begin flashing.
2 Press the UP/DOWN navigation arrows on the
remote control to select the day of the week,
then press the CLEAN/ENTER button to set. On
the screen, the hour field in the time display will
begin flashing.
3 Use the UP/DOWN arrows on the remote control
to select the hours, then press the CLEAN/
ENTER button to set. On the screen, the minutes
field in the time display will begin flashing.
4 Use the UP/DOWN arrows to select the minutes,
then press the CLEAN/ENTER button to set. On
the screen, AM and PM will begin to flash.
5 Use the UP/DOWN arrows to select AM or PM,
then press the CLEAN/ENTER button to set.
6 Once you have finished setting the time, you can
proceed to setting a cleaning schedule.
USING THE SHARK ION™ ROBOT
SETTING THE CLEANING SCHEDULE
IMPORTANT: If your robot does not beep or show the Schedule icon, you may be out of range. To resend
the scheduling data to your robot, move close to the robot and press and hold the UP arrow on the remote
for two full seconds, until the Signal icon appears. Your robot will beep and display the Schedule icon. Make
sure the remote is pointed directly at your robot.
Dock Max
Clean
Enter
Hold / to Set
1 To schedule a cleaning, the day and time must
be set. If you haven't yet set the date and time,
follow the steps on the previous page.
2 To schedule or edit a cleaning, press and hold
the SCHEDULE button (with the calendar icon)
on the remote control for one second. On the
screen, the day of the week display will flash.
3 Use the UP/DOWN arrows on the remote to
select the day of the week for your scheduled
cleaning. (Days with a cleaning already scheduled
will be circled. If a day is not circled, there is no
cleaning scheduled for that day yet.) Press the
CLEAN/ENTER button on the remote to set the
day. The day of the week will remain flashing
until the cleaning time is completely scheduled.
4 Use the UP/DOWN arrows on the remote to
turn ON or OFF the cleaning scheduled for the
selected day. Press CLEAN/ENTER to confirm
selection.
NOTE: You will need to have at least one day scheduled for cleaning to toggle the schedule ON/OFF.
5 If OFF is selected, the screen will display the
days of the week again, with no time or AM/PM
options. If ON is selected, a circle will appear
around the selected day. To change the time of
the cleaning on the selected day, use the UP/
DOWN arrows on the remote to select the hour
of the cleaning, then press CLEAN/ENTER to set.
6 On the screen, the minutes field in the time
display will begin flashing. Use the UP/DOWN
arrows to select the minutes, then press the
CLEAN/ENTER button to set. On the screen, AM
and PM will begin to flash.
7 Use the UP/DOWN arrows to select AM or PM,
then press the CLEAN/ENTER button to set. Use
the UP/DOWN arrows on the remote to select
another day for a scheduled cleaning.
8 When all days and times for scheduled cleanings
are set, press the SCHEDULE button on the
remote to complete set up. (After 20 seconds of
inactivity, the system will time out and transmit
your current schedule.) Your robot should beep
and show the Schedule icon.
VIEWING SCHEDULED CLEANINGS
1 To view previously scheduled cleanings, press
the SCHEDULE button on the remote.
2 Once the SCHEDULE button has been selected,
the screen will display the days of the week.
Circles will appear around the days with
scheduled cleanings. (This action will time out
within 15 seconds of selecting the SCHEDULE
button on the remote.)
TURNING YOUR SCHEDULE ON/OFF
1 To turn the schedule ON, press and hold the UP
arrow on the remote for two full seconds. The
Signal icon will appear on screen and a Schedule
icon will appear on your robot.
2 To turn the schedule OFF, press and hold the
UP arrow on the remote for two full seconds.
The Signal icon will appear on screen and the
Schedule icon will disappear from your robot.
s h a r kc l e a n . c o m