Using The Motorized Floor Nozzle; What Does The Brushroll Indicator Light Mean; Choosing The Appropriate Setting - shark Rocket UV425CCO Guide Du Propriétaire

USING THE MOTORIZED
FLOOR NOZZLE
CAUTION: This vacuum
does not stand up on
its own, so when taking
a break from cleaning,
rest it against a piece
of furniture or a wall, or
lay it flat on the floor�
Using for an application
where the unit lacks
stability may result in
personal injury�
NOTE: Before
vacuuming your
delicate area rugs
or carpet, refer to
the manufacturer's
recommended
cleaning instructions�
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushroll is on and
working as it should�
Solid Red
There is a jam in the
brushroll area� Turn your
vacuum off and remove the
blockage�
No Light
The brushroll is not spinning�
1 Plug in the unit� Step on the foot
pedal and tilt the handle back�
Flashing Red
The motorized floor nozzle
is overheating� Turn your
vacuum off and wait
for it to cool down� See
Troubleshooting section for
more information�
9
1-800-798-7398
CHOOSING THE
APPROPRIATE SETTING
Slide the power switch on the handle to the appropriate setting to start cleaning�
Bare Floor, Small Area Rugs (I) – The brushroll spins slowly to clean bare floors
and delicate area rugs�
Carpets (II) – The brushroll spins faster to pick up debris below the surface of your
carpets�
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) use setting II, Carpets�
10
s h a r kc l e a n . c o m