Philips Cucina HR7638 Mode D'emploi & Recettes page 9

C
4 Put the tool holder in the bowl.
5 Put the ingredients in the bowl. Pre-cut
large pieces of food into pieces of approx.
3 x 3 cm. Put the lid on the bowl.
C
6 The buttons allow you to adjust the speed
of the appliance to obtain optimal results.
'PULSE / 0' button: for pulse operation and for
B
turning the appliance off. If the PULSE / 0 button
is pressed the appliance runs at the highest
speed. The appliance stops running when the
button is released.
button 1: for normal speed.
B
button 2: for high speed.
B
See the table for the recommended speeds.
Processing takes 10 - 60 seconds.
Tips
The appliance chops very quickly. Use the
pulse function for short periods at a time to
prevent the food from becoming too finely
chopped.
Do not let the appliance run too long when
you are chopping (hard) cheese. The cheese
will become too hot, will start to melt and
will turn lumpy.
Do not use the blade to chop very hard
ingredients like coffee beans, nutmeg and ice
cubes. The blade might get blunt.
If food sticks to the blade or to the inside of the
bowl:
1 Switch the appliance off.
2 Remove the lid from the bowl.
3 Remove the ingredients with the spatula.
Inserts
The cutting edges of the inserts are very sharp
Do not touch them!
1
Do not process hard ingredients, such as ice
2 cubes, with the inserts!
C
CLICK
1 Put the selected insert in the insert holder.
C
2 Place the insert holder onto the tool
holder that stands in the bowl.
3 Put the lid on the bowl.
C
4 Put the ingredients in the feed tube. Pre-
cut large chunks to make them fit into the
feed tube.
5 Fill the feed tube evenly for the best
results.
When you have to cut large amounts of food,
process only small batches at a time and empty
the bowl regularly between the batches.
ENGLISH
9