Please note that P5/16R+, P5/20R+ and P9/16R+ tubular drives are designed for use in individual systems (one roller shutter
curtain per barrel and drive). If several roller shutter curtains are operated on one barrel, the Torque recognition and function-
ing of the locking strap cannot be guaranteed.
Becker tubular drives with electronic limit switching can be parallel connected. The maximum switching contact loading of the
control device (timer, relay control, switch, etc.) must be observed.
Use external conductor L1 to control the up and down direction. Other devices or consumption units (lamps, relays, etc.) must
not be directly connected to the drive connection cables. For this purpose, the drives and additional units must be decoupled
by relay controls.
When installing the drive, an all-pole separation capability from the mains with at least 3mm contact opening width per pole
must be provided (EN 60335).
Important: Only use mechanically or electrically locked control elements.
The changeover time for changing the running direction must be at least 0,5 s. Switch and control must not execute simul-
taneous UP and DOWN commands.
To operate drives with electronic limit switching, only use control elements (time controls) which do not draw N potential via
the drive. The outputs of the control element must be potential-free in the neutral position.
Protect the electrical connections from damp.
Note
Becker tubular drives bear the CE mark. These drives comply with the valid EU guidelines and meet EMC
regulations.
If the drive is to be operated with units which contain sources of interference, the electrician must ensure
suitable interference suppression for the relevant devices.
Type
Nominal torque (Nm)
Output speed (min
)
-1
Limit switch range
Mains voltage
Power consumption (W)
Nominal current consumption (A)
Operating mode
Protection class
Min. tube diameter (mm)
Information for the Electrician
Technical data
P5/16R+
P5/20R+
5
5
16
20
64 revolutions
230V/50Hz
85
115
0,36
0,47
S2 4 min.
IP 44
37
DE
GB
FR
NL
P9/16R+
9
16
110
0,47
21