Displaying The Numeric Keypad Input Screen - Alpine IVA-W205 Mode D'emploi

2
Touch [RADIO].
The screen changes to the Radio mode main display.
Display example for FM Radio main screen
Changes to SETUP selection screen
Changes to VISUAL selection screen
Displays the source name, such as radio band, etc.,
that is selected
Changes to the SOURCE selection screen (to Step 1
screen)
Working state indicator
Displays volume level
Function Guide:
The function guide display varies depending on each
source.
The contents of the function guide change by touching
[P1/2]* or [P1/3]* on the function guide, and many other
operations can be performed.
Displays time
* Display may vary depending on the connected devices.
3
Touch [SOURCE] on the main source screen to
change to another source screen, and select the
desired source from the SOURCE selection screen.
• The screen can be changed to the VISUAL selection screen by
touching [VISUAL].
Set to VISUAL in "Setting the VISUAL Soft Button" (page 37).
• The screen can be changed to the SETUP selection screen by
touching [SETUP].
• After 5 seconds of each operation in the visual mode, the screen
changes to the visual screen only.
To display the main source screen, touch the display panel, then
touch [CONTROL] on the screen. The SOURCE selection screen
appears by touching [SOURCE] on the changed main source screen.
12
-EN
Displaying the Numeric Keypad Input
Screen
The numeric keypad input screen is displayed when the DVD mode is
selected for searching a title or chapter. It can also be used for entering a
country code or password for DVD setup, and for selecting a channel
number in the SAT Radio mode etc.
1
Touch [10KEY] on the main source screen.
2
Touch the desired numeric key.
Display example for numeric keypad
Operation buttons of this area can be used while

displaying the numeric keypad input screen.

Input screen area
Closes numeric keypad input screen
All input numbers will be deleted
Previous number will be deleted
Input number is confirmed
Numeric keypad
The numeric keypad input screen closes when the area
is touched while displayed.
3
Touch [ENT] to confirm your entry.