Setting The Treble Control; Turning Loudness On/Off; Other Functions; Displaying The Text - Alpine CDE-9852 Mode D'emploi

Setting the Treble Control

You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press MENU to select the BASS ENGINE mode, then
press MODE.
BASS ENGINE SETUP
2
Press or to select the TREBLE (Treble
Center Frequency) control mode.
BASS TREBLE
Setting the Treble Center Frequency
3
-1 Press SOURCE/POWER to select the desired treble
Center frequency.
10.0kHz 12.5kHz 15.0kHz
Emphasize the displayed treble frequency ranges.
Setting the Treble Level
3
*2
-2 Turn the Rotary encoder to select the desired
treble level (–7~+7).
You can emphasize the treble level.
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• If no operation is performed within 60 seconds, the treble control
setting will be turned off automatically.
• The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
• This function is inoperable when DEFEAT is set to ON.
• While in the treble adjusting mode, BASS CONTROL adjusting mode
can be recalled by pressing
2
* The adjustment can also be made by pressing MODE. Refer to
"Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Font and Rear)/Defeat" (page 12).

Turning Loudness On/Off

Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
Press and hold MODE for at least 2 seconds to activate
or deactivate the loudness mode.
"LD" indicator lights.
RETURN (OFF) BASS ENGINE
7.5kHz 10.0kHz
or .

Other Functions

Displaying the Text

Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name, and the tag, etc., while playing
MP3/WMA files.
Press TITLE.
The display will change every time the button is pressed.
The display in Radio mode:
FREQUENCY CLOCK
The display in CD mode:
TRACK NO./ELAPSED TIME
1
TEXT (DISC NAME)* TEXT (TRACK NAME)*
TRACK NO./ELAPSED TIME
The display in MP3/WMA mode:
FOLDER NO./FILE NO./ELAPSED TIME
FOLDER NO./FILE NO./CLOCK
FILE NAME ARTIST NAME*
2
TRACK NAME* FRAME*
FOLDER NO./FILE NO./ELAPSED TIME
1
* Displayed during playback of a disc with CD Text.
2
* ID3 tag/WMA tag
If an MP3/WMA file contains ID3 tag/WMA tag information, the ID3
tag/WMA tag information is displayed (e.g., track name, artist name,
and album name). All other tag data is ignored.
If the Scroll setting (page 15) is set to "SCROLL AUTO," the tag
information will scroll automatically.
3
* "ROOT" is displayed for the root folder which doesn't have folder
name.
4
* The recording sampling rate and bit rate of the MP3/WMA file are
displayed. A WMA file of variable bit rate displays the average bit
rate.
TITLE
FREQUENCY
TRACK NO./CLOCK
1
3
FOLDER NAME*
2 2
ALBUM NAME*
4
13
-EN