Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
inTended use
Incorrect use of the solenoid valve Type 6012 can
be dangerous to people, nearby equipment and the
environment.
•
The device is designed for blocking, dosing, filling and
venting neutral gaseous and liquid media.
•
Do not use the device outdoors.
•
Use according to the permitted data, operating condi-
tions and conditions of use specified in the contract
documents and operating instructions. These are
described in the chapter entitled "7. Technical Data".
•
The device may be used only in conjunction with third-
party devices and components recommended and
authorised by Bürkert.
•
Correct transportation, correct storage and installation
and careful use and maintenance are essential for reli-
able and problem-free operation.
•
Use the device only as intended.
english
4
3.3.
possible errors in use
•
The solenoid valve Type 6012 is not to be used in areas
where there is a risk of explosion.
•
Do not supply the medium connectors of the system with
aggressive or flammable mediums.
•
Do not put any loads on the body (e.g. by placing objects
on it or standing on it).
•
Do not make any external modifications to the device
bodies. Do not paint the body parts or screws.
english
6
3.1.
restrictions
If exporting the system/device, observe any existing
restrictions.
3.2.
approvals
The approval mark indicated on the Bürkert labels refers to
the Bürkert products.
e
1
03 5791
Devices which must bear the type approval mark were
approved at the Kraftfahrtbundesamt under the type
approval number
e1*72/245*2006/96*5791*00
and are put into circulation with the indicated type approval
mark. You can obtain an extract of the type approval from
the address below.
Bürkert Werke GmbH
Zulassungsbeauftragter,
Christian-Bürkert-Str. 13-17,
D-74653 Ingelfingen
4.
basic safeTy
insTrucTiOns
These safety instructions do not make allowance for any
•
contingencies and events which may arise during the
installation, operation and maintenance of the devices.
•
local safety regulations – the operator is responsible for
observing these regulations, also with reference to the
installation personnel.
Danger!
Danger – high pressure!
•
Before loosening the lines and valves, turn off the
pressure and vent the lines.
Risk of electric shock!
•
Before reaching into the system,
supply and secure to prevent reactivation!
•
Observe applicable accident prevention and safety
regulations for electrical equipment!
Risk of burns/Risk of fire if used continuously
through hot device surface!
•
Keep the device away from highly flammable sub-
stances and media and do not touch with bare hands.
Type 6012
english
5
5
switch off the power
english
7
7
Publicité
Table des Matières
