Selecting Ap Voices (Modular Synthesis Plug-In System) - Yamaha PLG150-AP Mode D'emploi

Selecting AP Voices
When the PLG150-AP is installed to a synthesizer compatible with the Modular Synthesis
Plug-in System, the AP voices can be selected in the same way as the internal voices of the
synthesizer.
• The example displays used in the following explanations are all taken from the MOTIF ES.
NOTE
1
Enter The Voice Play mode.
Press the [VOICE] button.
2
Select a Plug-in Voice bank.
Press one of the [PLG1] – [PLG3] buttons corresponding to the slot to which the PLG150-AP has
been installed.
NOTE
3
Select a Group.
Press any of the GROUP [A] – [D] buttons.
4
Select a Voice.
Press any of the NUMBER [1] – [16] buttons.
5
When selecting a bank in PLG150-AP (the MSB/LSB of preset bank (board
voice) or User Voice bank), press the [F2] BANK button, then select a bank.
Next, select a voice following steps 3 and 4 above.
• The bulk-dumped plug-in voice data is saved in the User Voice Bank (PLG1USR).
NOTE
For a list of the available banks and their MSB/LSB values, refer to the "Voice List" (page 20).
10
PLG150-AP Owner's Manual
• The example displays here may differ from the actual ones that appear on your instrument.
(Modular Synthesis Plug-in System)