Mounting And Installation - Siemens PolyCool Superheat CPS 40 Manuel D'installation Et D'utilisation

A Mounting on DIN rail
B Wall mounting
C Flush panel mounting
Recommendation!
Siemens
Building Technologies

3.1 Mounting and installation

Controller
No further parts are needed.
With four ellipse screws for holes with diameter of
4 mm x 6 mm
With HVAC Products ARG462.10 mounting kit
Mounting instruction M 3351.1
Electronic injection valve (EIV)
In order to prevent expansion valve from freezing during off
period (pump – down) it is required to install the valve above
the evaporator. This is especially important with plate heat
exchangers.
CPS40 CE1U3372XX / H 74 319 0555 0 d
2013-10-01
31/136