Invacare Aquatec Ocean Manuel De Maintenance page 21

IMPORTANT!
– Make sure that the plastic part in the release
mechanism remains down when screwing.
IMPORTANT!
– Make sure that the settings are the same on the left
and the right side. The play which is present when
the cable is pulled up must be the same on both
sides. This can be adjusted via the thread/nut at
the end of the cable at the release mechanism and
through the thread/nut on the adjusting element H
on the longer cable by unscrewing or screwing.
4. After completing the adjustment, lock the nuts on the
release mechanism and on the adjusting element.
5. Adjust the Bowden cable via the distributor C and lock
the nut so that the play on the handle and on the
release mechanisms is reduced (if you pull on the cable).
Due to the setting on the distributor, the plastic part on
the release mechanism must not be pulled upwards.
6. Check function: Both gas springs must trigger
simultaneously.
1640651-A
Instructions
21