Declaration Of Manufacturer; Abbreviations And Definitions; General Safety Precautions; Definition Of Symbols And Instructions - HYDAC ELECTRONIC HLT 2100-R1 Notice D'utilisation

6

1.4 Declaration of manufacturer

The measuring systems were developed, designed and manufactured under observation
of the applicable international and European standards and directives.
A corresponding manufacturer's declaration can be requested from HYDAC
ELECTRONIC GMBH.
The manufacturer of the product, HYDAC ELECTRONIC GMBH, operates a certified
quality assurance system in accordance with ISO 9001.
E

1.5 Abbreviations and definitions

HLT
SSI
EC
EMC
ESD
IEC
NEC
VDE

2 General Safety Precautions

2.1 Definition of symbols and instructions

WARNING !
CAUTION !
Edition: 2017-08-31
Linear-Absolute Measuring System
Synchronous Serial Interface:
European Community
Electro Magnetic Compatibility
Electro Static Discharge
International Electrotechnical Commission
National Electrical Code
Verein Deutscher Elektrotechniker (German Electrotechnicians Association)
means that death, serious injury or major damage to property could occur
if the stated precautions are not met.
means that minor injuries or damage to property can occur if the stated
precautions are not met.
indicates important information or features and application suggestions
for the product used
means that appropriate ESD-protective measures must be considered
according to DIN EN 100 015-1.
(Cause of a potential equalization between body and device-mass as well
as the housing-mass about a high-impedance resistance (approx. 1
MOhm) e.g. with a commercial ESD wrist strap).
HYDAC ELECTRONIC GMBH
HLT 2100 / HLT 2500 SSI
Part No.: 669999