Masquer les pouces Voir aussi pour GELATO NXT1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9

IMPORTANT!:

This Ice Cream Machine contains its own refrigerant which must be allowed to settle after transport. Leave the Ice Cream
Machine on a horizontal surface for at least 12 hours after purchase or after any move which might have stored the
machine the wrong way up.
Leave at least 20 cm on each side of the machine to allow free air circulation. Make sure the ventilation slots are free and
unobstructed. It is normal for warm or hot air to flow from the air grills. The refrigeration process requires this.
A) Use with fixed bow
l
Insert the mixing blade for fixed bowl (B)
Ÿ
Screw the appropriate fixing knob for blades (C)
Ÿ
B) Use with removable bowl
Pour in the fixed bowl about 1 measuring cup (H) of a salt
Ÿ
and water solution (per 100 g. 20 g. of salt and 80 g.
water) or a spirituous beverage with a proof higher than
40% or food alcohol.
Insert the removable pot (G) into the fixed bowl, by
Ÿ
pressing down on the end. Lift it and CHECK THE
EXTERNAL WALL OF THE REMOVABLE BOWL IS
COMPLETELY WET.
Without this operation, the machine will not work
optimally.
Insert the mixing blade for removable bowl (F)
Ÿ
Screw the appropriate fixing knob for blades (C)
Ÿ
ATTENTION!:
when using a saline solution, once you have finished using the machine, thoroughly wash and dry both the fixed
and removable bowls to prevent corrosion. Do not leave the saline solution inside the bowl!
ENGLISH
The machine is ready for use
The machine is ready for use
OPTIONS OF USE
40 -5 0m m
PAG. 04

Publicité

Table des Matières
loading

Table des Matières