Cleaning And Maintenance - Sinmag Europe HS-3 Mode D'emploi

ENG

7. CLEANING AND MAINTENANCE

Warning. Ensure the machine is isolated from the power supply before
commencing cleaning or maintenance.
Caution. This unit is not water proof. Do not use water jet or spray to
clean interior or exterior of this unit.
Please always keep the conveyor belt clean and use the brush and water to clean
1
the conveyor belt.
Remember to switch off the electricity after daily use. Please use the soft cloth to
2
clean outside part of the machine and use the brush to clean the inside part.
Normally there are much cake crumbs remaining on the working table, clean it and
3
always keep it clean.
Attention. No body will be allowed to put his fingers close to the running
blades. When the blades are dull, do not push the cake by hand, switch
off the power supply first and then replace them.
8
SINMAG EUROPE BVBA