Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
13
14
15
24
Sand the rudderhorn slightly and glue them
as shown on the picture with 5 min epoxy.
Insert the tailskid into the fuselage and bolt it.
ARF VERSION ONLY:
Extend the elevator servocable with an 50cm
extension. Use e commercial fastener ore tape
to secure the connector.
ARF VERSION ONLY:
Route the cable through the fuselage and in-
stall the elevator servo. Set the servo with the
transmitter to neutral and install the servohorn.
Use Loctite.
Publicité
Table des Matières
