Staufenbiel Outlaw Instructions De Montage page 20

EN
The Outlaw is an pure Aerobtatic and 3D Biplane in a high quality Plywood and Balsa construc-
tion. The Outlaw is available in PNP and ARF Version. Some steps in this manual are done in the
PNP Version and only needs to be finsihed in ARF Version. Tese steps are marked with -ONLY-ARF-
Version.
Please note that some of the steps and ways to build are on the decision of the modeller and
should be seen as proposal.
Please read this manual carefully before start assembling the modell.
01
Glue the rod of the main gear in the fuselage.
Close the gap with the plywood parts to fix
the rod.
20
PREFACE
THE FUSELAGE
02