Automatic Timer; Kitchen Timer; Automatic Safety Cut-Out; Basic Settings - NEFF T1.B22 Série Notice D'utilisation

The cooking time counts down. If you have set a
cooking time for several hotplates, you can display
each cooking time. To do so, touch the
select the relevant hotplate.
When the time has elapsed
When the cooking time has elapsed, the hotplate
switches off. lights up in the hotplate display. An
‹
audible signal will sound.
display for 10 seconds. The
any symbol. The displays go out and the audible signal
ceases.
Changing or cancelling the cooking time
Select the hotplate. Touch the
or - symbol to change the cooking time or set to
Note: You can set a cooking time of up to 99 minutes.

Automatic timer

You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can find out how to switch on the automatic timer in
the Basic settings section.~ Page 35
Note: You can change the cooking time for a hotplate
or switch off the automatic timer for the hotplates.
Select the hotplate. Touch the
or - symbol to change the cooking time or set to

Kitchen timer

You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
If a hotplate has been selected, touch the
■
twice within 10 seconds.
If a hotplate has not been selected, touch the
■
symbol.
lights up in the timer display.The indicator light next
‹‹
to the symbol lights up.
V
Setting the time
Touch the + or - symbol.The default value appears.
1.
+ symbol: 10 minutes
- symbol: 05 minutes
Touch the + or - symbol until the desired time
2.
appears on the timer display.
The time counts down.
An audible signal sounds once the time has elapsed.
lights up in the timer display for 10 seconds.
‹‹
Displaying the time
Use the symbol to select the kitchen timer. The time
3
is displayed for 10 seconds.
symbol to
$
lights up in the timer
‹‹
display lights up. Touch
x
symbol and use the +
3
symbol and use the +
3
symbol
3
Setting the correct time
Use the
3
the time.
bAutomatic safety cut-out
I f a hotplate has been switched on for a long time
A u t o m a t i c s a f e t y c u t - o u t
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
.
‹‹
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
QBasic settings
Y our appliance has various basic settings. You can
B a s i c s e t t i n g s
adapt these settings to suit your own needs.
Display Function
™‚ Automatic child safety lock
Switched off.*
‹
.
‹‹
Switched on.
‚
Manual and automatic child safety lock switched off.
ƒ
Audible signal
™ƒ
Confirmation signal and operating error signal are
‹
switched off (main switch signal always remains).
Only the operating error signal is switched on.
‚
Only the confirmation signal is switched on.
ƒ
Confirmation signal and operating error signal switched
„
on.*
3
Automatic timer
™†
Switched off.*
‹‹
Cooking time, after which the hotplates switch off.
‹‚ - ŠŠ
Duration of the timer end signal
™‡
10 seconds.*
‚
30 seconds
ƒ
1 minute.
„
Activation of the heating elements
™ˆ
Switched off.
‹
Switched on.
‚
Last setting before the hotplate was switched off.*
ƒ
*Basic setting

Automatic safety cut-out

symbol to select the kitchen timer and reset
and the
"‰
en
/ residual
• œ
35