Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Timer
The timer can be used in two different ways:
To switch a hotplate off automatically
■
As a kitchen timer
■
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time
Setting the heat setting
1.
Touch the
symbol. The
3
2.
lights up.
lights up on the timer display.
‹‹
Touch the + or - symbol. The default value appears.
3.
Symbol +: 30 minutes
Symbol -: 10 minutes
The cooking time counts down. If you have set a cooking time
for more than one hotplate, the cooking time of the selected
hotplate is always displayed.
Automatic setting
Touch the - symbol continuously and the cooking time
automatically counts back as far as 0 minutes.
Touch the - symbol continuously and the cooking time
automatically counts forward as far as 99 minutes.
When the time has elapsed
When the cooking time has elapsed, the hotplate switches off.
You will hear an audible signal and
for one minute. The
display lights up brightly. Touch the
x
symbol. The displays go out and the audible signal ceases.
Automatic time limit
If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating.
indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
display for the desired hotplate
x
lights up in the display
‹‹
and the
/
residual heat
" ‰
•
œ
Changing or cancelling the cooking time
Select the hotplate and touch the symbol
lights up brightly. Set the cooking time with the + or - symbol or
set to
.
‹‹
Note: You can set a cooking time of up to 99 minutes.
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
Basic settings section.
Note: You can change the cooking time for a hotplate or switch
off the automatic timer for the hotplates.
Select the hotplate and touch the symbol
lights up brightly. Set the cooking time with the + or - symbol or
set to
.
‹‹
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
If a hotplate has been selected, touch the
■
within 10 seconds.
If a hotplate has not been selected, touch the
■
The
display lights up.
W
Setting the kitchen timer
Set the desired time with the + or - symbol.
When the cooking time has elapsed
After the time has elapsed, you hear an audible signal.
lights up in the timer display. The
timer lights up brightly. After one minute, the display switches
off.
Displaying the time
Use the
symbol to select the kitchen timer. The time is
0
displayed for one minute.
3
Changing the time
Use the
3
symbol to select the kitchen timer and reset the
time.
. The
display
3
x
. The
display
3
x
symbol twice
3
symbol.
3
‹‹
W
indicator for the kitchen
31
Publicité
Chapitres
Table des Matières
