Activate/Deactivate Key Tones; Setting The Ring Melody; Automatic Answering; Default Settings (Reset) - Topcom COCOON 115 Mode D'emploi

COCOON 115

5.12 Activate/deactivate key tones

• Press the Set button
• Press numerical button '4'.
• Press numerical button '1' to activate or '2' to deactivate this function.
• Press the Memory button
Default setting: key tones activated.

5.13 Setting the ring melody

• Press the Set button
• Press numerical button '5'.
• Select the desired ring melody (1-4). Select '5' to turn the ring volume off.
• Press the Memory button
Default setting: ring melody 1

5.14 Automatic answering

It is possible to program the unit in such a way that, when you receive a call, you only have
to pick up the handset to connect directly to the external caller. It is no longer necessary to
press the Line button
• Press the Set button
• Press numerical button '0'.
• Press numerical button '1' to activate or '2' deactivate this function.
• Press the Memory button
Default setting: off
Note: When a call comes in and the handset is not lying on the base unit, you always
have to press the Line button
'Automatic answering' is activated.

5.15 Default settings (Reset)

If you want to reset the default settings of the unit, please take the following steps:
• Press the Set button
• Press numerical button '1'.
• Press numerical button '1' if you want to reset the default settings, or press '2' to cancel
• Press the Memory button
Note: When you reset the default settings, all memory-, call list, redial numbers will
be erased:
Flash time
Pause time
Key tones
Ring melody
15 minute timer
Auto answer

5.16 Setting the pause length

• Press the Set button
• Press numerical button '3'.
• Press '1' for 3 seconds or '2' for 6 seconds pause time
• Press the Memory button
.
. The unit emits a confirmation tone.
.
. The unit emits a confirmation tone.
first to accept the call.
.
. The unit emits a confirmation tone.
to accept the call, even when the function
.
. The unit emits a confirmation tone.
100ms
3s
ON
1
OFF
OFF
.
. The unit emits a confirmation tone
9