Adding Contact List Entries Via Bluetooth - Toyota Bluetooth Premium Mode D'emploi

Delete a contact when listing contact entries
1 List the contacts.
2 When the contact name is played for the contact you want to delete, say "DELETE COnTACT".
 When the hands-free system responds: Are you sure you want to delete the contact <name>?
say "YES".
The hands-free system responds: Contact deleted, and returns to listing the contacts.
Get the contact's details when listing contact entries
1 List the contacts.
2 When the contact name is played for the contact you want to delete, say "DETAILS".
The hands-free system responds with that contact's number.
4.9. Adding Contact List Entries via
Bluetooth
You can quickly transfer numbers from your handset device's phonebook via Bluetooth
the hands-free system
Adding a Contact List Entry from your Handset Device
1 Press and release the MULTI-FUnCTIOn button.
The hands-free system responds: Phone menu. {Say a command}.
2 When prompted, say "COnTACT LIST".
 The hands-free system responds: Contact list. {Say a command}. Say "ADD PHOnE
COnTACT".
4 The hands-free system disconnects your handset device and responds: Add phone contact and
is ready to receive contacts via Bluetooth
The Blue LED will flash fast to indicate that the hands-free system is waiting for contacts to be
sent from your handset device.
5 Select the desired contact(s) on your handset device and send them via Bluetooth
hands-free device. Refer to your handset device's user's guide for more details on how to
transfer contacts via Bluetooth
6 If prompted by the handset device, enter the passkey 0000, and press the OK key.
7 When the contact is received by the hands-free system, the system responds by reading out
the contact number as follows: <contact number #1> Yes or no?
Say "YES" to accept the number.
or
Say "nO" to reject the number and go to the next number/contact if one exists.
8 If the number is accepted, the hands-free system responds: Say the name. Recite the name of
the contact to be stored e.g. Mark's Mobile.
If an error is detected, the hands-free system asks you to try again.
If it accepts the name, the hands-free system responds: Contact <name> added.
* On some models.
® *
from your handset device.
®
.
®
to
®
to your
®
Bluetooth 2
®