Toyota Bluetooth Premium Mode D'emploi page 19

Calling with digit segments
1 Press and release the MULTI-FUnCTIOn button.
The hands-free system responds: Phone menu. {Say a command}.
2 When prompted, say "DIAL nUMBER".
The hands-free system responds: number please?
 Dictate the first segment of digits. (For example, say the first  numbers.)
The hands-free system recites the digits heard.
4 Dictate the next segment of digits. The hands-free system recites the digits heard.
Repeat this step until you enter the complete phone number.
5 When the complete number is recited by the hands-free system, say "DIAL" (or "YES") to dial
the number.
The hands-free system responds: Dialling.
Placing a call using phone voice commands
For some handset devices, a voice tag must already be stored in the handset device to use
this feature. For other handset devices, this command may activate the handset device's
internal VR application.
1 Press and release the MULTI-FUnCTIOn button.
The hands-free system responds: Phone menu. {Say a command}.
2 When prompted, say "PHOnE VOICE COMMAnDS".
The hands-free system responds with the listening prompt.
 Say "<VOICE TAG>" (where <voice tag> is a voice tag stored in the handset device).
or
Say a command understood by the handset device's VR application.
The hands-free device calls the number associated with the voice tag/VR command.
Or use the UIM: A press and hold of the SEnD button will activate the phone voice
commands feature.
Note: Using this feature and you can dial numbers directly from your handset device's
phonebook.
Placing a call using redial
1 Press and release the MULTI-FUnCTIOn button.
The hands-free system responds: Phone menu. {Say a command}.
2 When prompted, say "REDIAL".
The hands-free system responds: Redialing and redials the last number dialed on the handset
device.
Or use the UIM: A press and release of the SEnD button will redial the last number dialed on
the handset device.
18 Bluetooth
®