Mectron PIEZOSURGERY touch Mode D'emploi page 21

LIGHT S
(ref. inside cover)
Depending on the type of handpiece and
operation that needs to be performed, it is
possible to choose 3 options from the "light"
list:
• By choosing the AUTO option, the LED light
on the front terminal of the handpiece is
switched on by pressing the foot pedal, and
automatically switches off 3 seconds after
the pedal is released.
• By choosing the ON option, the LED light on
the front terminal of the handpiece stays on
permanently, regardless of whether pressure
is applied on the foot pedal or not. The
light switches off 100 seconds after the last
pressure of the foot pedal and the option
shifts from ON to AUTO.
• By choosing the OFF option, the LED light on
the front terminal of the handpiece stays off
permanently.
The position of the LED light on the front
terminal of the handpiece can be adjusted in
the following way:
• Hold the body of the handpiece and lightly
unscrew the metal ring nut located at
the base of the front terminal, rotating it
counter-clockwise.
• Rotate the front terminal so that the LED
light goes into the desired and necessary
position.
• To fasten it into position, screw the metal
ring nut, rotating it clockwise.
SYMBOLS U
(ref. inside cover)
The PIEZOSURGERY® touch is equipped with
a diagnostic circuit that allows to detect
operating abnormalities and to view their type
on the keyboard via their relative symbol.
To help the user identify the malfunctioning
part, four symbols are foreseen which are
described in paragraph 09.1.
05 Û USE
EN
17