Scrigno OPEN 2.0 Antamatic Manuel D'utilisation page 56

Open
2.0
MOUNTING THE JUNCTION BRACKET
16
FOR BASE FRAME AND DOORTECH
Prepare the belt joint bracket
A
according to the SCRIGNO
frame model.
For Essential PRO kits
For BASE and
DOORTECH kits
(remove rubber
bumper)
Screw up the 2 hex head screws without fully
C
tightening.
R1387 DCM2461/SCRIGNO - OPEN2.0
Mark the position of the 2 holes in the centre of the door, using the
B
bracket as a reference. Drill a hole in the door with a suitable drill bit.
Closing
upright
| pagina 56
Opening
upright
=
=
D
Remove the bracket.
EN