Changing The Ignition Battery; Safety Thermocouple; Ignition Spark Plug - Hatco KRAMPOUZ KGRDG Série Manuel D'installation Et D'utilisation

MAINTENANCE

Changing the Ignition Battery

The electronic ignition button is powered by a replaceable LR6
(1.5 V) battery. To replace the battery:
1. Unscrew and remove the ignition
button.
2. Remove the old battery from the
button housing.
3. Place the new batter into the
battery housing.
4. Thread the ignition button onto
the button housing.

Safety Thermocouple

To ensure safe operation of the gas griddle, the end of the
safety thermocouple on each burner must be positioned in the
flame and 5/64" (2 mm) above the burner.
5/64"
(2 mm)
Burner
Button
Housing
LR6
(1.5 V)
Battery
Ignition
Button
Safety Thermocouple

Ignition Spark Plug

For proper ignition of the
burners, make sure each
ignition spark plug
positioned 3/16" (5 mm) from
its corresponding burner.
12
English
3/16"
(5 mm)
Spark
Plug
is
Burner
Form No. KGRDGM-0120