1. Quick fastener (× 2)
1. Fixation rapide (× 2)
1. Fijador rápido (× 2)
1. Panel E
1. Cache E
1. Panel E
2. Panel C
2. Cache C
2. Panel C
2. Bolt (× 3)
2. Boulon (× 3)
2. Perno (× 3)
To install
1. Place the panel in the original position and in-
stall the quick fasteners.
2. Install the front carrier and the bolts, then
tighten to the specified torque.
Tightening torque:
Carrier bolts:
19 Nm (1.9 m·kgf)
Panel E
To remove
Remove the bolts, and then take the panel off.
To install
Place the panel in the original position, and then
install the bolts.
8-25
EBU01013