Before Calling Your After Sales Service - BORETTI BKI 178 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BEFORE CALLING YOUR AFTER SALES SERVICE

Alarm
indicator led
is turning on
If your fridge is not working properly, it may be a minor problem, therefore check
the following, before calling an electrician to save time and money.
What to do if your appliance does not operate;
Check that;
• There is no power,
• The general switch in your home is disconnected ,
• The socket is not sufficient. To check this, plug in another appliance that you
know which is working into the same socket.
What to do if your appliance performs poorly;
Check that;
• You have not overloaded the appliance ,
• The fridge temperature set to 2.
• The door is closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
If your fridge is operating too loudly;
Normal Noises
Cracking (Ice cracking) Noise:
• During automatic defrosting.
• When the appliance is cooled or warmed (due to expansion of
appliance material).
Short cracking: Heard when the thermostat switches the compressor on/
off.
Compressor noise: Normal motor noise. This noise means that the
compressor operates normally Compressor may cause more noise for a
short time when it is activated.
Bubbling noise and splash: This noise is caused by the flow of the
refrigerant in the tubes of the system.
ERROR
TYPE
There is/are some
part(s) Out of order
or there is a failure in
"Failure
Warning"
The product is plugged
for the first time or
a long-time power
interruption for 1 hour.
WHY
cooling process.
WHAT TO DO
Check the door is open or
not and check if the product
working 1 hour. If the door is
not open and the product had
worked 1 hour, call service
for assistance as soon as
possible.
EN
33

Publicité

Table des Matières
loading

Table des Matières