USAGE INFORMATION
Fridge Temperature Settings
• The initial temperature of the Setting Display is 5°C.
• Press fridge setting button once.
• Every time you press the button, the setting temperature will increase. (2°C,
4°C, 5°C, 6°C, 8°C, super cooling)
• If you press fridge setting button until super cooling symbol is displayed on
your fridge
Settings Display and you do not press any button within the following 3 seconds,
Super cooling will blink.
• If you keep on pressing, it will restart from last value.
Warnings About Temperature Adjustments
• Your temperature adjustments will not be deleted when an energy breakdown
occurs.
• Do not pass to another adjustment before completing an adjustment.
• Temperature adjustments should be made according to the frequency of door
openings, the quantity of food kept inside the fridge and ambient temperature
of the place of your fridge.
• Your fridge should be operated up to 24 hours according to the ambient
temperature without interruption after being plugged in to be completely
cooled.
• Do not open doors of your fridge frequently and do not place much food
inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the compressor
of your fridge, when you take the plug off and then plug it on again to operate
it or when an energy breakdown occurs. Your fridge will start to operate
normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated
in the standards, according to the climate class stated in the information
label. We do not recommend operating your fridge out of stated temperatures
value limits in terms of cooling effectiveness.
• This appliance is designed
for use at an ambient
temperature within the 10°C -
38°C range.
Climate class Abbient temperature (
T
Between 16 and 43 (
ST
Between 16 and 38 (
N
Between 16 and 32 (
SN
Between 10 and 32 (
EN
27
C)
o
C)
o
C)
o
C)
o
C)
o