Checking For Blockages - shark Rocket UV425CCO Guide Du Propriétaire

MAINTAINING YOUR VACUUM
IMPORTANT:
During cleaning or
maintenance, DO NOT
cut anything other
than hair, fibers, or
string wrapped around
the brushroll�
TIP: Ensure the bottom
of the floor nozzle is
completely sealed and
locked before using�
TIP: You do not need
any tools to open the
floor nozzle, just a coin�

CHECKING FOR BLOCKAGES:

HANDHELD AND WAND
1 Remove the wand from the handheld vacuum and
check all dust cup intake openings�
2 Remove the floor nozzle from the wand and check
the wand for blockages�
17
1-800-798-7398
STEP 1
STEP 2
BOTTOM OF FLOOR NOZZLE
1
Use a coin to unlock the three locks
on the bottom of the floor nozzle�
2
To access the brushroll, remove
the cover from the bottom of the
floor nozzle� Shine a flashlight from
the bottom to check for possible
blockages in the airway�
STEP 3
STEP 4
3
Remove any string, carpet fibers,
or hair that may be wrapped around
the brushroll� There is a groove along
the brushroll that allows a pair of
scissors to cut across it to loosen
up debris�
4 To reinstall the cover, line it up,
then rotate down until it clicks
into place� Use the edge of a coin
to close the three locks on the
bottom of the nozzle�
s h a r kc l e a n . c o m
18