Checking For Blockages - shark ROTATOR NV500 Serie Instructions

CHECKING FOR BLOCKAGES

WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing�
TIP: You can also check
for blockages in the hose
and tubes. Just remove
floor nozzle, dust cup and
hose and shine a flashlight
in the openings.
BOTTOM OF FLOOR NOZZLE
1 Using a coin, turn the
screws to the unlock
position and pull up
to expose the airway.
Remove the blockage.
21 1-800-798-7398
STEP 1 STEP 2
2 Remove any string, hair
or debris that may be
wrapped around the
brushroll.
STEP 1
STEP 2
HOSE CUFF AT BASE OF POD
1 Squeeze tabs and remove hose.
2 Tilt elbow down 90 degrees.
STEP 3
STEP 4
3 Press elbow release latch.
4 Remove elbow and check for blockages.
Once blockages are removed, replace
elbow by inserting back into the opening,
then clipping back into the latch.
s h a r kc l e a n . c o m 22