Cleanmaxx PC-P008E Mode D'emploi page 26

EN
7. Let all parts dry completely in the air before you reassemble them. NOTICE: Never
assemble wet or damp components or attach them to the motor unit (17)! The
device is assembled in the reverse order.
Cleaning the Motor Unit, Extension Tube and Nozzles
• Wipe down the motor unit (17), articulated suction tube (9) and nozzles with a damp,
soft cloth if necessary. Then dry them with a soft cloth.
• Regularly remove hair and fl uff from the nozzles and brushes.
• Remove the dust cloth from the dusting mop (10) and wash it as per the washing
instructions.
●
Cleaning the electrical fl oor nozzle
To make it easier to clean, the brush can be removed from the electrical fl oor nozzle (12):
Storage
• Store the device in a cool, dry place which is protected from direct sunlight and is out
of the reach of children and animals.
• For easy storage, attach the device with its suction opening (21) facing downwards
on the wall bracket (6) which is supplied.
If you do not want to use the device for a prolonged period, remove the recharge-
able battery (7) to stay on the safe side (see section "Charging the rechargeable
battery").
Washable at 40°C
Tumble dry, low heat.
Do not dry-clean.
1. Slide the latch fastener on the bottom of the electrical
fl oor nozzle towards the small wheel on the electrical fl oor
nozzle.
2. Open and remove the latch.
3. Take out the brush and remove any contamination.
4. Reinsert the brush. When you do this, fi rst insert the end
with the star-shaped recess.
5. Insert the latch and slide the latch fastener back in place.
26
Do not bleach.
Iron at low temperature
•
Do not use fabric softener.
Wash separately or with the same
colours.