Use And Operation; Recommendations For Use; Description Of Controls - Angelo Po 191BR2EA Manuel D'utilisation Et D'installation

RECOMMENDATIONS FOR USE

Important
The rate of accidents deriving from the use
of appliances depends on many factors
which cannot always be foreseen and con-
trolled. Some accidents may be caused by
unpredictable environmental factors, while
others are due above all to the behaviour of
users. As well as receiving authorisation
and appropriate instruction, if necessary,
the first time they use the appliance, users
must carry out a few simulated practice op-
erations in order to get to know the controls
and the main functions. Use only as intend-

DESCRIPTION OF CONTROLS

The appliance is fitted with the controls for use
of its main functions.
A)Control knob: turns the appliance's elec-
tricity supply on and off and sets the heating
temperature.
B)Heating element control knob: for setting the
heating power.
C)thermostat light: indicates that the safety thermo-
stat has tripped
IT
GB
Off marker
DE
FR
ES
power marker
English

USE AND OPERATION

Off marker
B
G
ed by the constructor and never tamper
with any device to obtain performance lev-
els outside the rated specifications. Before
use, check that the safety devices are prop-
erly installed and in good working order. As
well as taking care to meet these require-
ments, users must also implement all safe-
ty regulations and read the description of
the controls and the start-up procedure
carefully.
D)Mains light: indicates that the appliance is receiving
electrical power.
E)Temperature light: indicates that heating of the well
is in progress.
F) Well filling switch: for delivering water to the cook-
ing well and turning off the water supply once the well
is full.
G) Button: used to raise the well so that it can be emp-
tied.
H) Button: used to lower the well into the working po-
sition.
A
Temperature
marker
H
- 8 -
C
D
E
C
H
G
B
F
A
D
E
IDM-39616700400.tif
4
F