Resetting The Appliance - Angelo Po 191BR2EA Manuel D'utilisation Et D'installation

RESETTING THE APPLIANCE

Important
The appliance must only be reset by skilled,
authorised staff.
Caution - warning
Before doing any work, cut off the mains elec-
tricity supply.
The appropriate procedure for this operation
varies depending on the type of electrical de-
vice to be reset.
– Safety thermostat
– Motor overload cutout
Safety thermostat
1 - Cut off the mains elec-
tricity supply using the
appliance's mas-
ter switch.
2 - Allow the appli-
ance to cool for
about 10 min.
3 - Undo the screws
(C) and remove
the control panel (D).
IT
GB
DE
4 - Press the button (E) of the safety thermostat to
restore the electricity supply.
FR
5 - Replace the control panel (D) on completion of
the operation.
ES
6 - Operate the appliance's master switch to con-
nect it to the electrical mains.
English
D
C
- 10 -
D C
E
IDM-39616701000.tif
IDM-39616700500.tif