Cleaning Instructions; Fault - Angelo Po 191BR2EA Manuel D'utilisation Et D'installation

CLEANING INSTRUCTIONS

Since the appliance is used for preparing foods for
human consumption, special care must be paid to
everything relating to hygiene, and the appliance
and the entire surrounding environment must con-
stantly be kept clean
Important
Before starting any cleaning procedure,
disconnect the electricity supply using the
circuit-breaker and allow the appliance to
cool.
The precautions which follow are also important.
– Clean all parts of the appliance with warm water,
food-approved detergents and non-abrasive ma-
terials only.
– Thoroughly clean all parts which come into direct
or indirect contact with foods and all surrounding
areas.
IT
TROUBLESHOOTING
GB
The appliance has been tested before being put
into service.
The information provided below is intended to assist in
DE
the identification and correction of any anomalies and
malfunctions which might occur during use.
FR
Faults
ES
No water delivered
English
– After use, clean the accessories with a suitable
grease-remover product. If possible, wash in the
dishwasher.
Caution - warning
Never use products containing substances
harmful or hazardous for health (solvents, pe-
troleum spirits, etc.).
– Rinse surfaces with drinking water and dry.
– Pressurised water jets may only be used on ex-
ternal parts.
– Take special care not to damage stainless steel
surfaces. In particular, avoid the use of corrosive
products and do not use abrasive materials or
sharp tools.
– Remove food residues immediately before they
set.
– Remove the limescale deposits which may form
on some of the appliance's surfaces.

FAULT

The user can solve some of these problems him-
self, but for others specific technical knowledge or
skill is required, and so they must only be carried
out by qualified staff with recognised experience ac-
quired in the specific sector of operation.
Causes
Filler solenoid valve faulty
Filling switch malfunction
- 14 -
Remedies
Check the solenoid valve
connection
Important
Contact the after-sales
service
Important
Contact the after-sales
service
6