Cleaning Instructions - Angelo Po 090FT1G Manuel D'utilisation Et D'installation

Since the appliance is used for preparing foods for
human consumption, special care must be paid to
everything relating to hygiene, and the appliance
and the entire surrounding environment must con-
stantly be kept clean
Important
Before starting any cleaning operation, al-
ways turn off the gas supply tap, cut off the
electricity supply using the master switch
and allow the appliance to cool.
The precautions which follow are also important.
1 - Clean all parts of the appliance with warm wa-
ter, food-approved detergents and non-abra-
sive materials only.
2 - Thoroughly clean all parts which come into di-
rect or indirect contact with foods and all
surrounding areas.
3 - After use, clean the accessories with a
suitable grease-remover product. If possi-
ble, wash in the dishwasher.
IT
IT
Caution - warning
Clean the plate appropriately, using the op-
tional equipment available.
GB GB
DE DE
Important
When cleaning, use only food-approved de-
FR FR
tergents.
ES ES
English

CLEANING INSTRUCTIONS

CLEANING THE PLATE
A
Caution - warning
Never use products containing substances
harmful or hazardous for health (solvents, pe-
troleum spirits, etc.).
4 - Rinse surfaces with drinking water and dry.
5 - Pressurised water jets may only be used on ex-
ternal parts.
6 - Take special care not to damage stainless steel
surfaces. In particular, avoid the use of corro-
sive products and do not use abrasive materials
or sharp tools.
7 - Remove food residues immediately before they
set.
8 - Remove the limescale deposits which may form
on some of the appliance's surfaces.
To carry out this operation, proceed as follows.
1 - Use the scraper tool (A) to remove cooking res-
idues from the plate.
2 - Spread a suitable degreaser on the plate and
leave it to act for a few minutes.
3 - Plug the drain hole (B).
4 - Pour water at 60° C onto the plate and leave it
to soak for a few minutes.
C
B
- 14 -
B
IDM-39614700900.tif