Description Of Controls; Switching The Appliance On And Off; Turning Off - Angelo Po 090FT1E Manuel D'utilisation Et D'installation

DESCRIPTION OF CONTROLS

The appliance is fitted with the controls for use of its
main functions.
A)Heating element control knob: for turning the
heating elements off and on and setting their lev-
el.
B)thermostat light: when on, indicates that the safety
thermostat has tripped. The light goes out once the
appliance has been reset.
Off marker
Temperature dial

SWITCHING THE APPLIANCE ON AND OFF

Lighting
The first time the griddle is switched on, wash the
plate to remove the protective grease and any dirt,
then switch on the appliance and preheat it for
about 2 hours at the temperature of 195°C.
1 - Turn on the appliance's circuit breaker to con-
nect it to the electrical mains.
2 - Turn the knob (A) clockwise (pos. 1) to the tem-
perature required to turn on the heating elements.
The lights (C-D) come on; when the working tem-
perature is reached, light (D) goes out.
Important
For appliances with chromium-plated and
compound plate, preheating of about 30
min. to the temperature of 190°C is neces-
sary the first time the appliance is switched
on each day.

Turning off

1 - Turn the knob (A) anti-clockwise (pos. 2) to turn
off the heating elements.
2 - Turn off the appliance's circuit breaker to dis-
connect it from the electrical mains.
A
B
C
D
- 9 -
C)Mains light: comes on to indicate that the electricity
supply is on.
D)Temperature light: comes on to warn that the plate
is not yet at the preset temperature. The light goes
out once the temperature is reached.
D
A
D
A
A
B
C
D
A
IDM-39616100600.tif
A
IT
GB
D C
1
DE
FR
ES
2
IDM-39616100700.tif
English