Cleanmaxx JC-210 Mode D'emploi page 32

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

B
A
A
10. Insert the mains plug in a properly installed socket that is easily accessible.
11. Set the On/Off switch (7) on the main unit to position I. The power light (17) will illu-
minate and the device will heat up.
12. The control light (16) will illuminate once the device has reached the operating tem-
perature.
13. Hold the steam trigger (14) down to emit steam from the nozzle. Releasing the steam
trigger will interrupt the emission of steam from the device.
14. Move the nozzle slowly back and forth across the surface to be cleaned and push
down the steam trigger as needed.
15. If the water tank is empty and no more steam is produced, set the On/Off switch (7)
on the main unit to the 0 position and pull the mains plug out of the socket. Refi ll the
water tank (see chapter "Filling the water tank"). Then continue cleaning.
16. When the cleaning process is complete, move the On/Off switch (7) on the main unit
to the 0 position and pull the mains plug out of the socket. Let the device cool off
completely. Empty the water tank completely before you stow the device.
17. Prior to using the device again, the water tank should always be checked for residual
water and be completely emptied if necessary.
7. The short and the long steam nozzle can be used for
cleaning on their own as simple steam nozzles or com-
bined with the small round brush (2), the large round brush
(21), the spatula adapter (22), the angle and tile nozzle
(26), the metal brush (27) or the triangular brush (28).
These adapters are simply attached to the large or small
steam nozzle and can also be simply pulled back off (see
the fi gure with the example of the long steam nozzle and
the large round brush).
8. If you would like to clean cushions, use the cushion clean-
ing adapter with the corresponding cleaning cloth.
9. If you would like to clean windows, use the cushion clean-
ing adapter combined with the window cleaning adapter.
First hook the window cleaning adapter into the loops on
the cushion cleaning adapter (A) and then hook the large
hook (B) to the cushion cleaning adapter.
32

Publicité

Table des Matières
loading

Table des Matières