Menu Page Picture Or Pc; Menu Page Sound; Menu Page Osd Setup; Menu Page Advance - Monacor TFT-2404SDI Mode D'emploi

6.12.1 Menu page Picture or PC

GB
Image settings
According to the video source, the menu page
will be displayed in different versions:
Version PC for the source PC at the VGA input
Version Picture for all other video sources
Version Picture
Contrast, Brightness, Hue,
Saturation, Sharpness
Color Temp.
Picture Mode
DNR
DLC
Contrast, Brightness, Hue, Saturation, Sharpness
Set the desired value for the corresponding
parameter. Please refer to Note 1 in chap-
ter 6.4.
Color Temp.
Select one of the colour modes Normal, Warm,
Cool, sRGB (standard for computer applications,
available for the source PC only) or User. For the
option User, individual values for the compo-
nents of red, green and blue can be adjusted:
Use the button
the parameter Red, Green or Blue, press the but-
ton "Source/ " to call it up, use the button
or to set its value and press the button
"Menu/OK" to return.
Auto Adjust
When the menu item has been activated with
the button "Source/ ", the image will be auto-
matically adjusted. Any values for H Position and
V Position that have been set manually on the
menu page Advance will be corrected.
Picture Mode
Select one of the modes Standard, Movie, Vivid or
User. When Standard, Movie or Vivid has been
selected and the values of the parameters
Contrast ... Sharpness are changed, the monitor will
go to User and save the modified values for this
mode. For the other three modes, the values
are preset.
DNR (Digital Noise Reduction)
Select the level of noise reduction (Low, Medium,
High) or deactivate the noise reduction (Off).
DLC (Dynamic Luminance Control)
Activate (On = image reproduction with deeper
black) or deactivate (Off) the function.

6.12.2 Menu page Sound

Sound settings
Volume
Adjust the desired value for the volume.
Mute
Activate (On = sound muted) or deactivate (Off)
the muting function.
Sound Mode
Select one of the sound modes Standard, Movie,
Vivid or User. When Standard, Movie or Vivid has been
selected and the values of the parameters Bass
and Treble are changed, the monitor will go to
User. However, when the monitor is set to a dif-
ferent sound mode or when the monitor is dis-
connected from the power supply, the modi-
fied values for Bass and Treble will be reset to the
User presets.
14
Bass, Treble
For tone control, adjust the desired value for
the low frequencies and high frequencies.
When the values are changed, the monitor
will go to the sound mode User (see above).
Balance
This model is designed for mono reproduction
Version PC
only; therefore, the preset value should not be
Contrast, Brightness
changed.
Color Temp.

6.12.3 Menu page OSD Setup

Scale (not adjustable)
Auto Adjust
Language
Select the desired menu language (available
languages: English, French, German, Spanish,
Italian, Dutch, Polish, Russian, Czech).
Set ID
The ID number is required for the ID func-
tion (
"Source/ " to call up the menu item and use
the button
(0 ... 99).
Gamma
For brightness correction of the grey values,
select the gamma value: 0, 1 or 2.
or to select
Freeze
Freeze function (On) or (Off)
Note: When the function has been activated and the
monitor is switched to a different source or to stand-
by, the function will be deactivated. However, the
menu still shows On. To match the menu indication
and the setting, set the menu item to Off.
OSD Time
Use this menu item to define the display time
of the OSD menu (in seconds) when the set-
tings have been made and no further button is
pressed. The time adjusted also applies to
other on-screen displays outside the menu,
e. g. setting scale for a parameter, called up
via the button ITEM (3).
OSD Halftone
Use this menu item to adjust the transparency
of the OSD menu and of the on-screen dis-
plays: The lower the value, the higher the
transparency of the background for the letter-
ing. The setting will not affect the OSD menu
for USB connection (
Recall
When the menu item has been activated with
the button "Source/ ", the monitor will be
reset to the factory defaults. This will take a
few seconds. The menu is exited and the
source AV1 is selected.
Obiter
To prevent shadow images (= persistence of
previous image contents, may occur when still
images are shown for a longer time), an auto-
matic function will move the image at regular
intervals. Activate (On) or deactivate (Off) the
function.
The last line on the menu page (information on
firmware version) is not adjustable.

6.12.4 Menu page Advance

It is not possible to make any settings for digital
sources on this page. For the source PC at the
VGA input, only the menu items H Position and
V Position are adjustable.
Basic settings
chapter 6.10): Press the button
or to set the desired number
chapter 6.9).
Settings for the image display
Scale
Select one of the following formats: Full, Zoom,
Subtitle, Regular, Panorama, 14 : 9 or 4 : 3.
Scan Size
Select the scan mode Normal (= image of
source scaled) or Native (= image of source in
original size).
H Position, V Position
To move the image horizontally, reduce or
increase the value of H Position. To move the
image vertically, reduce or increase the value
of V Position.
If the image of the sources AV1, AV2 and
SVIDEO is moved, the monitor will automatically
go to the format Full and the scan mode Normal.

6.12.5 Menu page PIP

Settings for multi-display function
Multi Window
Select the desired multi-display function (PIP
= Picture in Picture, POP = Picture outside
Picture).
Off
no multi-display mode
PIP
picture in picture
POP Full images side by side in full aspect ratio
POP 4 : 3 images side by side in the format 4 : 3
Sub Source
Select the source for the secondary image.
The source to be selected depends on the
main source ( table in chapter 6.8).
Size
When PIP has been selected, define the size of
the secondary image (Small, Middle, Large).
Position
When PIP has been selected, define the posi-
tion of the secondary image on the screen:
1 = left top, 2 = left bottom,
3 = right bottom, 4 = right top
Border Color
Select the colour for the border of the second-
ary image (Black or Blue).
Sound Source
Use this menu item to define if the sound of
the main source (Main) or the sound of the sec-
ondary source (Sub) is to be reproduced.
Swap
When the menu item has been activated with
the button "Source/ ", the image assignment
between the two sources will be swapped.
7 Replacing the Battery of the
Remote Control
1) On the rear of the remote control, push the
small latch with the groove to the right and pull
out the battery support at the same time (also
see imprint on the rear of the remote control).
2) Remove the discharged battery and insert a
new 3 V button cell (CR 2025) into the sup-
port, positive pole facing up.
3) Push the support into the remote control.
Never put discharged batteries in the
household waste; always take them to a
special waste disposal, e. g. collection
container at your retailer.