Ce Declaration Of Conformity - Triton 300W Multi Tool Instructions D'utilisation Et Consignes De Sécurité

Troubleshooting
Problem
Tool does not start when switch is operated
Blade not cutting correctly
Sanding sheets come loose from sanding pad during use
Unknown mechanical noise
Burning smell or other abnormal operation
Guarantee
To register your guarantee visit our web site at tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated otherwise) for
information on future releases. Details provided will not be made available to any
third party.
Purchase Record
Date of Purchase: ___ / ___ / ____
Model: TMUTL Retain your receipt as proof of purchase

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: Triton
Declares that: This declaration has been issued under the sole responsibility of the
manufacturer. The object of the declaration is in conformity with the relevant Union
harmonisation Legislation.
Identification code: TMUTL
Description: 300W Oscillating Multi-Tool
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU
• EN 60745-1:2009+A11:2010
• EN 60745-2-4:2009+A11:2011
• EN 55014-1:2006+A1:2009+A2:2011
• EN 55014-2:2015
• EN 61000-3-2:2014
• EN 61000-3-3:2013
Possible cause
No power
Defective switch or tool fault
Speed setting too low
Material may not be suitable for the blade installed
Material not suitable for tool
Blade may be worn
Speed set too high
Too much downward pressure during use
Hook and loop surface of sanding pad worn out
Accessory not securely fitted
Tool fault
Tool fault
Triton Precision Power Tools guarantees to the purchaser of this product that if any part
proves to be defective due to faulty materials or workmanship within 3 YEARS from the
date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of charge.
This guarantee does not apply to commercial use nor does it extend to normal wear and
tear or damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
t pr
ar
This does not affect your statutory rights
Notified body: TÜV Rheinland Co., Ltd
The technical documentation is kept by: Triton
Date: 18/05/2017
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address: Powerbox,
Boundary Way, Lufton Trading Estate, Yeovil, Somerset, BA22 8HZ, United Kingdom.
Solution
Check power supply
Return the tool to an authorised Triton service
centre for repair
Increase speed
Change blade
For some materials, including hardened metals,
compatible blades are unavailable. Revert to
alternative methods of cutting
Replace blade
Reduce speed
Reduce hand pressure
Replace sanding pad
Check blade or other accessory is securely tightened
Stop using the tool and return it to an authorised Triton
service centre for repair
Switch the tool off and disconnect from power supply
immediately. Return it to an authorised Triton service
centre for repair
oves to be defecti
GB
9