Password; T Em P E Rat U R E ( In St Ru M En T Ve Rs Io N S O N Ly); Activation Delay (Instrument Versions Only); M O D E M En U ( I N St Ru M En T V Er Sio N S O N L Y) - ETATRON D.S. eOne PLUS Notice D'installation, Mode D'emploi, Notice D'entretien

Password

By means of enabling and setting the 4-digit password, the user can protect the device and prevent access to the
programming menus by unauthorized personnel.
Temperature (Instrument versions only)
It is possible to select one of the following operational modes:
MANUAL – the value set in the configuration menu by the user, is the reference parameter for the
•
compensation of the pH value.
AUTOMATIC - The value measured by the probe is the reference parameter for the compensation of
•
the pH value. In the menu "MODE PH, RX, CL, PPM" the "TEMP" menu appears.

Activation delay (Instrument versions only)

If there is a need to delay the operation of the pump you can set a delay in the following time in the following scale:
0" ÷ 60'
Mode menu (Instrument versions only)
In order to simplify the definition of the various functions we have introduced two selections that allow you to modify
the complexity level of the programming:
FULL - All functions are available.
•
BASIC - Only the main functions are available.
•
You can set a time after which the display will automatically exit the programming menu. The default time is 2'.

Language

You can select one of the following languages for the display messages.
Italian
•
English
•
Reset
The device is equipped with two reset levels, the user can choose between the following two possibilities:
PARTIAL RESET - The pump remains in the selected operating mode (proportional or control), but all
•
factory settings are restored and all user settings deleted.
TOTAL RESET - The pump returns to its factory settings, at reboot you will need to set the operating
•
mode you want to activate: VFT, VFT-S, MF, ST, VFT-T, VFT-S-T, MF-T, ST-T, as per the table.
ENGLISH
65