Table des Matières
Publicité
EUROBLOC
1 Major update history (only in English)
Section
Hook operated control limit
switch
Second brake
Rope guide
Lubricant volumes, travel gears
Wire rope
Drum brake
Installation of normal headroom
trolley
Installation of double girder
trolley
Rope drum service
Recommended tightening
torques
Maintenance interval table
Hoisting machinery, service
Trolley buffers
Wedge housing, assembly
Lubricants
Commissioning
Lubricants
Rope anchorage
Hook-block, rope reeving and
return sheaves
Installation, Normal headroom
trolley
Hoisting motor and brake
Construction, Rope guide
Construction
Low Headroom
-
Trolley Hoist
Hoisting limit switch
-
Drum size 243 mm
Hook operated upper
-
limit switch
Rope drum
-
Rope guide
-
Overload protection
-
Installation
Low headroom trolley
-
Lubricants
Lubricant quantities
-
Using the pushbutton controller Drawings updated.
Construction, Rope guide
Ce document et les informations qu'il contient sont la propriété exclusive de Verlinde S.A. et constituent un secret commercial privé, confidentiel et propriétaire ne
pouvant pas être reproduit, divulgué à des tiers, modifié ni utilisé de quelque manière que ce soit sans l'autorisation écrite de Verlinde S.A. Copyright © (2005)
Verlinde S.A. Tous droits réservés.
Description
Construction of hook operated control limit switch added.
Construction and service of second brake, brake release and
manual crank added.
Construction of rope guide added (ø 608 mm).
Lubricant volumes for larger trolley gears added.
Rope inspection criterions changed (minimum wire brakes).
Construction and service of drum brake added.
Installation instructions for normal headroom trolley added
(Drum size 608 mm).
Checks of trolley buffers during installation added.
Check of free rotation. Replacement of axial locking part.
(Drum size 303/355/406 mm)
Replacement of self locking nuts (Nyloc).
Inspection interval of hoisting machinery and coupling changed.
Inspection interval for drum brake added.
Inspection and replacement of coupling clarified.
Trolley buffer inspection instructions added.
Replacement of split pin.
Lubricant type for couplings changed.
Inspection of rope anchorage
Lubricant type and volumes for hoisting gears (GEN4)
changed.
Drawings updated.
Hook forging dimensions updated.
Straight beam heading added. Curved beam instructions added. 9.12.2005
Hoisting brake details updated.
Drawings updated.
New hoist size added (drum diameter 243 mm)
Rope guide assembly instruction added (drum diameter 608
mm).
MANUEL D'ENTRETIEN - PALAN
Date
Handled by
26.8.2004
23.9.2004
9.12.2004
11.1.2005
13.1.2005
28.2.2005
20.4.2005
10.5.2005
10.5.2005
10.5.2005
10.5.2005
10.5.2005
10.5.2005
18.5.2005
25.5.2005
13.9.2005
21.9.2005
29.9.2005
5.10.2005
9.12.2005
10.1.2006
13.1.2006
16.1.2006
5.4.2006
6
KHHJII
KHHJII
KHHJII
KHTJPU
KHHASI
KHHJII
KHHJII
KHJII
KHHASI
KHHASI
KHHJII
KHHJII
KHHJII
KHHJII
KHTJPU
KHHJII
KHTJPU
KHMJER
KHHJII
KHHJII
09/2007
Publicité
Table des Matières
